Raspberry Pi Zero ID: 2885

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero! We also have a budget pack and starter pack with all the essentials to get your Zero up and running. At first glance, the Pi Zero isn't much.  It just looks like a slimmed down version of the Raspberry Pi we know and love.  But when we started to think of the possibilities - and what a well-chosen set of accessories could add - we realized the appeal. And then we saw the price...could it be true? Yes! This is the slimmest, most pared down Raspberry Pi to date.  It's kind of like the little cousin to the Pi 2 - with just a micro SD card slot, a mini HDMI port, two micro USB ports (one for power, one for USB), and 512MB of RAM. It has a single-core 1 GHz processor chip, similar to the Pi A+ and B+. Check out our writeup on the Pi Zero over at the Adafruit Learning System We think the Zero is a great sidekick for existing Raspberry Pi users. It requires a little more effort to get up and running than a Pi 2 but it also has a lot of potential for IoT, wearable, embedded and battery powered projects! Please note - the Pi Zero is quite minimal and requires a few accessories to turn it into a computer! At a minimum we recommend: To keep the price and size as small as possible, there is a spot on the Zero for a 2x20 pin header. This header is not included or soldered on. Creative individuals can easily solder in a set of 2x20 male header strip so you can plug in any sort of Pi HAT or other plug-in topper. Or, go with a 2x20 female header and plug the Pi Zero directly into an Adafruit Cobbler or T-Cobbler. We also strongly recommend some other parts and pieces to make your Pi Zero computing experience easier: See our Distributors page for a complete list of distributors.